Exheat FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2) in BULGARIA

Brand: Exheat

Country: Bulgaria

Technical specification : Unit FP4-CA6-1-20-FS3-SO-RTD Customer Reference CEH1001/2 Item Number 031781.05.02 Capacity 1.0 kW – client specified Voltage 400V, 3Ph, 50/60Hz (4-W STAR) Fixing DN80 PN40 EN1092-1 Blind RF 316L Stainless Steel Flange Immersed Length 510mm of which 50mm is inactive Cable Entries Main Terminal box: 1 x M32 & 1 x M25 complete with temporary plugs (terminals suitable for 4mm² as standard, please advise if larger supply cable is to be used) HIHSPD140 Auxiliary Box : 2 x M20 complete with temporary plugs Protection ATEX / IECEx Certified Ex II 2 G D Ex d IIC T4 Gb Zone 1 & 2 Ex tb IIIC T135°C Db Zone 21 & 22 - LCIE 01 ATEX 6056X IECEx LCI 06 0006X Enclosure Powder Coated Mild Steel Weatherproof IP66 Elements 6 off 12 mm diameter Removable 304 St/Steel Cartridge Elements housed in a 16 mm Plain Surface 316L Stainless Steel Sheath with 316L St/Steel Thermostat pockets Stand Off 100mm Heater Bundle 72 mm diameter Watts Density 0,9W/cm² Controls (VAC) (S1) 1 off Simplex PT100 process temperature RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +65°C (S2) 1 off Simplex PT100 Over temperature Limit RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +80°C (S3) 1 off Manual Reset Box Cut Out set at +80°C, located within the terminal box to prevent overheating !Each heater must be fitted with 1 off (minimum) control sensing the heater mounting flange/process temperature and 1 off terminal box cut-out. The sensors shall be connected to a suitable temperature control system to shut down the heater in the event the maximum temperature is exceeded. Over temperature control & cut-out must be manual reset either by: a.) auto-reset control & auto reset cut-out being, reset at control panel by key switch or special tool. b.) thermostat & cut-out being manual reset units, i.e. manual reset inside terminal box. Test Pressure 20 Bar g Working Pressure 13 Bar g Weight Approx 19 kgs each Ambient temperatures from -60°C up to +60°C - Note, if the ambient temperature is lower than -40°C, please contact sales

Condition: New (Unused)