Lowara 70640163AY00001 in JAPAN

Brand: Lowara

Country: Japan

Technical specification : Pumptype: LSN 100-65-160 S1VV1 2202 Identical to s/n 60699102 Single stage endsuction pump according to ISO 5199/5199 with enclosed radial impeller. Process design with heavy duty bearing frame for continuous operation with reinforced shaft and bearings. Thrust bearing at drive side, pair of angular contact bearings, roller bearing at pump side. Materials: Impeller : alloy cast steel, 1.4408 Casing : alloy cast steel, 1.4408 casing cover : alloy cast steel, 1.4408 Shaft : alloy steel, 1.4021 shaft sleeve : Stainless Steel Wear rings : without (Standard) Shaft seal: S1..1 Cyclone seal chamber with smooth shaft sleeve Shaft seal MG912 Single seal rubber bellow, unbalanced Materialcombination : BQ1EGG Fluid : Water, pure Temperature : 4 °C Density : 1000,000 kg/m³ Viscosity : 1,569 mm²/s Capacity : 103,0 m³/h Head : 50,0 m Power : 18,2 kW Efficiency : 77,4 % NPSH : 4,16 m Speed : 3550 1/min Req. Motor power : 21,3 kW Suction flange : DN 100, PN16, EN 1092 (IC) horizontal at centerline Discharge flange : DN 65, PN16, EN 1092 (IC) vertical at top-centerline max. Casing pressure : 1600 kPa Suction-/Systempressure : 9,81 kPa Lubrication :Oil (Standard) Oilsump cooling :without Oilsump cooling Constant level oiler :without constant level oiler, with sight glass Labyrinth seals :without Motor Brand : WEG Type : W22 - 180 M - 22kW Nom. power : 22 kW Nom. current : 34,6 A Voltage : 460 V Frequency : 60 Hz Speed : 3540 1/min Design : IM B3 Size : 180 M Isolation class : F Protection class : IP55

Condition: New (Unused)