日本でExheatのFP4-CS1-0.63-20-FS3-SO-RTD, 031781.01.02 (ZEH 1006)
ユサキオートメーション合同会社 から日本でExheat FP4-CS1-0.63-20-FS3-SO-RTD, 031781.01.02 (ZEH 1006) の最良価格を御提供致します。
製品: FP4-CS1-0.63-20-FS3-SO-RTD, 031781.01.02 (ZEH 1006)
ブランド: Exheat
国名: 日本
技術仕様 : Unit FP4-CS1-0.63-20-FS3-SO-RTD
Customer Reference ZEH 1006
Item Number 031781.01.02
Capacity 0.63kW – client specified
Voltage 400V, 3Ph, 50/60Hz (4-W STAR)
Fixing DN80 PN40 EN1092-1 Blind RF 316L Stainless Steel Flange
Immersed Length 500mm of which 50mm is inactive
Cable Entries Main Terminal box: 1 x M32 & 1 x M25 complete with temporary plugs (terminals suitable for 4mm² as standard, please advise if larger supply cable is to be used)
HIHSPD140 Auxiliary Box : 2 x M20 complete with temporary plugs
Protection ATEX / IECEx Certified Ex II 2 G D Ex d IIC T4 Gb Zone 1 & 2 Ex tb IIIC T135°C Db Zone 21 & 22 - LCIE 01 ATEX 6056X IECEx LCI 06 0006X
Enclosure Powder Coated Mild Steel
Weatherproof IP66
Elements 1 off 2” diameter Removable Ceramic Core Element housed in a Plain Surface 316L Stainless Steel Sheath with 316L St/Steel Thermostat pockets
Stand Off 100mm
Heater Bundle 64mm diameter
Watts Density 0.9W/cm²
Controls (VAC) - (S1) 1 off Simplex PT100 process temperature RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +65°C
(S2) 1 off Simplex PT100 Over temperature Limit RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +80°C
(S3) 1 off Manual Reset Box Cut Out set at +80°C, located within the terminal box to prevent overheating
!Each heater must be fitted with 1 off (minimum) control sensing the heater mounting flange/process temperature and 1 off terminal box cut-out. The sensors shall be connected to a suitable temperature control system to shut down the heater in the event the maximum temperature is exceeded.
Over temperature control & cut-out must be manual reset either by:
a.) auto-reset control & auto reset cut-out being, reset at control panel by key switch or special tool.
b.) thermostat & cut-out being manual reset units, i.e. manual reset inside terminal box.
Test Pressure 20 Bar g
Working Pressure 13 Bar g
Weight Approx 18kgs each
Ambient temperatures from -60°C up to +60°C - Note, if the ambient temperature is lower than -40°C, please contact sales
条件:新品(未使用)
機器や機械を修理するために必要なExheatの製品をご提供致します。
Exheatが製造する商品FP4-CS1-0.63-20-FS3-SO-RTD, 031781.01.02 (ZEH 1006)の価格と納期については、担当者にお問い合わせください。
Exheatの高品質な製品を使用することで、コストを最小限に抑えられます。
当社は日本において、お客様のニーズを十分に理解しお手伝い致します。
日本のExheatの正規代理店ではありませんが、最良価格で提供しております。
日本のExheat - FP4-CS1-0.63-20-FS3-SO-RTD, 031781.01.02 (ZEH 1006)の見積もり依頼については、お問い合わせください。
数年間、私たちはお客様に製品を提供してきました。電子メールまたは、お問い合わせフォームからお問い合わせ下さい。当社は、このブランドの公認卸売業者または代理店ではありません。
からの他の製品 Exheat
29322.04.EL
CORE ELEMENT
P/N: 29322.04.EL
CORE ELEMENT
FP4H-3-3-11-AS
FP4H-1-1-8-ASZ
HEATER,IMMERSION
S0380000032027
Original Spare Part
S0380000032001-obsolete-replaced by S0380000032077
HEATER
S0380000000222
CONTACTOR
S0260000050005
HEATER
34616.02THY
THYRISTOR
S0260000160002
HEATER
S0260000100017
HEATER
S0380000036013
HEATER
S0380000032077
PUSHBUTTON (BLACK)
FP4-CM1-2-29-BS ATEX
Heater ATEX
S0380000000099
THERMOSTAT
S0380000000098
THERMOSTAT
S038200019
ANTI-CONDENSATION HEATER
S038200017
ANTI-CONDENSATION HEATER
S0380000000915
EARTH LEAKAGE RELAY
S0380000000902
EARTH LEAKAGE CT